用光学分布时钟实现位同步的光互连网络设计
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TP393.4

基金项目:

“8 63”计划资助项目 (863 -3 0 7-16-18)


Design of an Optical Interconnect Network with Optical Distribution Clock for Global Synchronization
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本文采用时分复用技术和高速交叉开关实现80Gbit/s的数据交换,通过引入光学分布时钟减小光信道之间进行切换时的链路重建时间。采用该位同步结构,可把机群系统网络互连通道切换时的链路重建时间由ms量级减小到us量级。数据包在网络中的通信延迟可减少2~个数量级。当时钟速率为1GHz,要求各结点的时钟相位差小于5%时钟周期时,对光纤长度误差要求为1cm。

    Abstract:

    In this Network,time division multiplexing technique and high speed cross connect switch have been adopted to achieve 80 Gbit/s data switching.The distributed optical closk has been introduced to decrease link set up time when optical channels are switched.Adopting this bit synchronization architecture,the link set up time on the order of millisecond can be decreased to several microseconds.Data packet communication latency can be decreased to several microseconds.Data packet communication latency can be decreased two to three magnitudes in the computer cluster.The requirement on fiber length error is 1 cm when the clock phase skew is limited to 5 percent of a clock period at 1 GHz.

    参考文献
    相似文献
    引证文献
引用本文

井文才 张以谟 等.用光学分布时钟实现位同步的光互连网络设计[J].光电子激光,2002,(1):37~39

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:2001-07-11
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码