氯化钠晶体注入着色
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

O773

基金项目:


Electrolytic Coloration of Sodium Chloride Crystals
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    用自制的电注入装置,对氯化钠(NaCl)晶体进行电注入并使之有效着色,在晶体中产生F色心、胶体(C)心和一些未知色心。采用3种不同条件对NaCl晶体进行电注入,详细研究了温度和电压对色心浓度的影响。研究结果表明,随着温度和电压的升高,色心的浓度增大,并且存晶体不同部位,相应色心浓度不同。

    Abstract:

    Sodium chloride(NaCl) crysals were effectively colored electrolytically with a homemade electrolytic apparatus.Some F,colloid(C) and unknown color centers were produced in the colored crystals.The electrolysis was performed under three kinds of different conditions,and dependency of temperature and voltage on concentration of color center was investigated in detail.Research results show that the concentration of the color center increases with temperature elevating and voltage rising,and the concentrations of the corresponding color cneters at the different parts in the colored crystals are different.

    参考文献
    相似文献
    引证文献
引用本文

宋翠英,顾洪恩,陈锋.氯化钠晶体注入着色[J].光电子激光,2006,(3):334~336,351

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2005-06-23
  • 最后修改日期:2005-10-28
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码