航天器薄膜充气天线面形的视觉测量方法
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TP206.1

基金项目:

国家自然科学基金 , 北京市自然科学基金 , 北京市教委科技发展计划项目 , 北京市优秀人才培养基金 , 机电系统测控北京市重点实验室资助项目


Vision Measurement for the Profile of Gossamer Inflatable Spacecraft Antenna
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用视觉测量的方法,对直径3.5 m的薄膜充气天线进行了高精度测量,测量过程分为空间点坐标计算、薄膜充气天线面形的拟合及精度分析.测量结果表明,该方法的相对精度达到1/2,000.

    Abstract:

    The antenna,solar sails and redar arrays in spacecraft made of different gossamer materials are developed widely in space technology.The conventional measurement methods cannot reach the demand of these large-scale and flexible structures.The vision measurement method can be considered as the optimal solution in the profile measurement of gossamer spacecraft because of its advantages of noncontact and rapid data acquisition.A videogrammetric system for a 3.5 m diameter gossamer inflatable antenna is presented.There are three steps in the measurement procedure:the computation to 3-D coordinate of measured points,the least square fitting of the profile of gossamer inflatable antenna and the precision analysis.The relative accuracy of 1/2 000 can be achieved.

    参考文献
    相似文献
    引证文献
引用本文

吕乃光,王永强,邓文怡,董明利,王君,潘志康.航天器薄膜充气天线面形的视觉测量方法[J].光电子激光,2007,(6):714~716

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2006-07-15
  • 最后修改日期:2006-10-10
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码