基于靶式和悬臂梁的FBG流量/温度同时测量研究
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TP212.14

基金项目:

国家“863”计划资助项目(2006AA06Z210,2007AA03Z413); 国家自然科学基金资助项目(60654001,6027007); 西安石油大学青年科技创新基金资助项目(Z07072)


FBG sensors combining target with cantilever beam for simultaneous measurement of Flow-rate/temperature
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    提出一种基于靶式结构和悬臂梁结合的新型流量/温度同时测量的光纤Bragg光栅(FBG)传感器。当流体流过传感器,流速的变化引起圆形靶产生应变,应变传递到等强度悬臂梁1上,进而引起粘贴其上的FBG1波长发生改变,而粘贴在悬臂梁2上的FBG2波长不发生改变;流体温度发生变化会引起FBG1、FBG2波长同时发生改变,且波长改变相同;通过测量两光栅的波长,得到流体的流量和温度。在水和蓖麻油实验得到:传感器的流量测量范围分别是400~2200cm3/s和700~1800cm3/s,温度测量范围是0~100℃。

    Abstract:

    A novel FBG sensor for simultaneous discriminating measurement of flow-rate and temperature is developed based on target and cantilever beams.While fluid passes through the sensor,the change of flow velocity in the pipeline results in the strain change of target stucture,and then the strain transmits on cantilever beam,the wavelength of FBG1 on it is changed but the wavelength of FBG2 on the other cantilever beam isn′t changed.While the change of temperature of fluid results in the wavelength ch...

    参考文献
    相似文献
    引证文献
引用本文

禹大宽.基于靶式和悬臂梁的FBG流量/温度同时测量研究[J].光电子激光,2010,(5):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码