利用平面间单应关系的指示位置判别方法
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TP391.41

基金项目:

国家自然科学基金重点资助项目(60832003),国家自然科学基金资助项目(60772124); 上海大学研究生创新基金资助项目(SHUCX091022)


Indication position estimation method using the homography between planes
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在基于计算机视觉技术的非接触式人机交互系统中,为了快速推断使用者指示的目标位置,提出一种无需显式求解摄像机参数的指示位置判别方法。利用目标平面上的已知点及其对应的摄像机成像点,求解目标平面和摄像机像平面间的单应矩阵,将目标平面上相交于指示点的两条直线与像平面上的对应直线联系起来,从而通过检测图像中的特定直线推断指示点的位置。实验表明,在2.5 m的距离上,由单应矩阵映射造成的点对应平均误差为0.73 mm;同时,系统对指示点的估计误差从屏幕中央至边缘上升了2.6%。

    Abstract:

    To get a rapid estimation of the user′s indication position in the computer vision based non-contact human-computer interaction(HCI) system,an indication position estimation method without explicitly calculating the camera parameters was proposed.The homography matrix was calculated using the known points on the target plane and their corresponding points imaged by the cameras.By the homography relationship,the two lines which intersect at the indication point on the target plane were related wi...

    参考文献
    相似文献
    引证文献
引用本文

董志华.利用平面间单应关系的指示位置判别方法[J].光电子激光,2011,(1):110~114

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码