不同氧含量的激光熔覆层耐点蚀性能研究
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TG174.44

基金项目:

海军工程大学校基金资助项目(HGDJJ00438)


Study on pitting corrosion resistance of laser cladding coatings with different contents of oxygen
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为弄清O含量对钢耐点蚀性能的影响规律,研究4种不同O含量的激光熔覆层样品的点蚀诱发和点蚀扩展行为。在pH为10的3%(质量分数)NaCl溶液中进行极化实验和交流阻抗实验,比较钢的点蚀诱发敏感性;在人造海水中进行模拟闭塞腐蚀电池试验,评价样品的点蚀扩展速度;用扫描电镜(SEM)和电子探针(EP-MA)分析熔覆层的夹杂物组成和腐蚀形貌。结果表明随熔覆层中O含量的增加,样品的钝化膜稳定性增强,点蚀诱发敏感性减弱;在相同条件下,具有高O含量的熔覆层表现出更正的保护电位和更小点蚀扩展速度;熔覆层中固溶O可提高基体的热力学稳定性,从而增强抵御点蚀的能力。

    Abstract:

    In order to understand the effect of oxygen content on pitting corrosion resistance of steels,the pitting initiation and pitting propagation of laser cladding coatings with four different contents of oxygen were studied.The pitting susceptibility was compared by means of the polarization and electrochemical impendence spectroscopy(EIS) tests in 3%(mass percent) NaCl solution with pH of 10.The pitting propagation rate was evaluated in artificial seawater by simulating the occluded corrosion cell test.The com...

    参考文献
    相似文献
    引证文献
引用本文

曹国良.不同氧含量的激光熔覆层耐点蚀性能研究[J].光电子激光,2011,(2):243~248

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码