基于大剪切方棱镜的三维电子散斑干涉技术
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

O436

基金项目:

山东省科技攻关资助项目(2007GG20004002)


Three-dimensional ESPI based on large shearing blocky prism
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    提出了一个新的测量物体三维形变量的系统。其中,光源部分由3个激光器组成,参考物被粘贴在压电陶瓷(PZT)相移器上,通过该相移器产生参考光并实现相移,物光和参考光通过放置在CCD前方的大剪切棱镜产生干涉。为了验证该系统的可行性,对简支梁进行了位移场的测量,并给出了实验结果。由于大剪切方棱镜采用普通玻璃材料制成,因此不仅克服了采用双折射材料带来实验成本的增加,还进一步提高了干涉条纹的质量。

    Abstract:

    A new three-dimensional(3-D) electronic speckle pattern interferometry(ESPI) system is constructed by using three ESPI systems,a large shearing blocky prism and a reference.In the system,the light source was composed of three lasers,and the reference was attached to the PZT phase shifter.At the same time,the PZT phase shifter could be used to generate a reference light and push reference plane to change optical path of reference light.Then the object light interfered with the reference light through a large...

    参考文献
    相似文献
    引证文献
引用本文

王兴海.基于大剪切方棱镜的三维电子散斑干涉技术[J].光电子激光,2011,(2):277~280

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码