LiCaPO4:Eu3+材料制备白光LED及其发光特性
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

O614.111

基金项目:

国家自然科学基金资助项目(50902042);河北省自然科学基金资助项目(E2009000209;E2010000283);河北省教育厅基金资助项目(2009313);发光与光信息技术教育部重点实验室研究基金资助项目(2010LOI12)


Preparation and luminescent characteristics of white LED with LiCaPO4:Eu3+ phosphor
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用高温固相法制备了LiCaPO4:Eu3+红色发光材料,研究了Eu3+掺杂浓度、R+或Cl-等对材料发光性质的影响。结果显示,在399 nm近紫外光激发下,材料呈多峰发射,分别由Eu3+的5D0→7FJ(J=0,1,2,3,4)能级跃迁产生,主峰为612 nm;监测612 nm发射峰,所得激发光谱由O2-→Eu3+电荷迁移带(200~350 nm)和f-f高能级跃迁吸收带(350~450 nm)组成,主峰为399 nm。Eu3+浓度为5%时,LiCaPO4:Eu3+材料的发射强度最大;依据Dexter理论,得出浓度猝灭机理为电偶极-电偶极相互作用;添加R+或Cl-提高了LiCaPO4:Eu3+材料的发射强度,且Li+和Cl-的效果最好。

    Abstract:

    A novel red emitting phosphor LiCaPO4:Eu3+ was synthesized by the high temperature solid state reaction method,and the effects of Eu3+ content,R+ and Cl-on the luminescent properties of the phosphor were investigated.LiCaPO4:Eu3+ phosphor presents several emission peaks under 399 nm excitation,which correspond to the 5D0→7FJ(J=0,1,2,3,4) transition of Eu3+,respectively,and the highest emission is located at 612 nm.At 612 nm emission,the excitation spectrum contains 200-350 nm and 350-450 nm two ...

    参考文献
    相似文献
    引证文献
引用本文

王志军,李盼来,杨志平,郭庆林. LiCaPO4:Eu3+材料制备白光LED及其发光特性[J].光电子激光,2011,(5):718~721

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码