基于皮秒脉冲泵浦的5W全光纤超连续谱光源
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TN253

基金项目:

国家自然科学基金资助项目(61007054,10904173);广东省自然科学基金资助项目(9451806001002428);深圳市科技计划资助项目(200718)


5 W all-fiber supercontinuum source pumped by picosecond pulse fiber laser
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于三级MOPA结构皮秒光纤激光器泵浦一段30 m长的国产光子晶体光纤(PCF),实现了全光纤化结构的超连续谱(SC)光源。在PCF与单模光纤(SMF)模场不匹配条件下,通过仔细调节熔接参数,在19 W入射功率条件下实现了最大功率为5 W的稳定超连续输出,系统光-光转换效率为24%。输出能量被很好地限制在纤芯,纤芯光斑为六边形的基模光斑。研究了光谱的演变过程,在最高功率时,对应的光谱短波展宽至600 nm,长波超过1 700 nm。 更多还原

    Abstract:

    A supercontinuum(SC) source based on tri-stage MOPA configuration picosecond fiber laser pumping a 30 m-long home-made photonic crystal is reported.The system is all fiber,and a stable supercontinuum source with maximum power of 5 W at input power of 19 W is demonstrated by carefully adjusting the splicing parameter although the mode fields of the photonic crystal fiber and single mode fiber mismatch.The optical-optical conversion efficiency is 24%.The output energy is well confined in the fiber...

    参考文献
    相似文献
    引证文献
引用本文

闫培光,赵健,阮双琛,舒杰,赵俊清,李相,陈胜平,韦会峰.基于皮秒脉冲泵浦的5W全光纤超连续谱光源[J].光电子激光,2011,(6):820~822

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码