基于双悬臂梁结构的光纤加速度传感器
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TP212

基金项目:

国家自然科学基金(41074128,61077059);北京市科技新星计划(2010B055)资助项目


Fiber accelerometer based on double-cantilever structure
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为消除悬臂梁结构加速度传感器由于光纤表面粘贴产生的啁啾现象,增强横向抗干扰能力,提高共振频率,提出了一种基于双悬臂梁结构的光纤加速度传感器。给出了理论分析结果,建立了有限元模型,得到了加速度灵敏度表达式,并且探讨了在共振频率不变的情况下提高加速度灵敏度的方法。实验结果表明,该传感器在6~50 Hz内频响平坦,加速度灵敏度为14pm/g,抗横向干扰能力达20dB,与理论计算较好地吻合。

    Abstract:

    A novel fiber accelerometer based on double-cantilever structure is presented in this paper.The accelerometer can eliminate the chirp effects casued by glue,reduce the transverse response and increase the natural frequency.Theoretical analysis is given and the finite element method is used.A method to enhance the sensitivity without reducing the resonant frequency is also proposed.The experimental results show a flat frequency response from 6 Hz to 50 Hz,a sensitivity of 14 pm/g and a directivity of better than 20 dB,which agree well with the theoretical analysis.

    参考文献
    相似文献
    引证文献
引用本文

侯跃峰,路智敏,张文涛,李芳.基于双悬臂梁结构的光纤加速度传感器[J].光电子激光,2012,(4):644~648

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码