用于白光LED的Ca2BO3Cl:Eu2+发光特性研究
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TN312.8

基金项目:

国家“973”计划(2010CB327704);国家自然科学基金(60978060、10974013);教育部新世纪优秀人才支持计划(NCET-10-0220);中央高校基本科研业务费专项资金(2012JBZ001);教育部博士点基金(20090009110027);北京市自然科学基金(1102028);北京交通大学基本科研业务费(2011YJS073);北京交通大学优秀博士生科技创新基金(48034)资助项目


Luminescent properties of Ca2BO3Cl:Eu2+ phosphor for white LED
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用高温固相法,制备了适于紫外-近紫外及蓝光激发,主峰位于573nm的Ca2BO3Cl:Eu2+黄色荧光粉。研究了Ce3+以及CaCl2和H3BO3用量对材料发光特性等的影响。结果表明,添加Ce3+,明显增强了Ca2BO3Cl:Eu2+材料在紫外-近紫外区的吸收,有效地提高了材料的发射强度;添加过量的CaCl2或H3BO3,均能提高Ca2BO3Cl:Eu2+材料的发射强度,最佳的CaCl2和H3BO3用量分别为过量5mol%和15mol%。将Ca2BO3Cl:Eu2+材料与460nm InGaN芯片组合,获得了白光发射,色坐标为(0.339,0.351)。

    Abstract:

    Ca2BO3Cl:Eu2+ yellow phosphor was synthesized by a high temperature solid-state reaction method,and it can be excited by ultraviolet-near ultraviolet and blue light irradiation.The final phase is investigated with the conventional X-ray diffraction(XRD).The spectral characteristics of the phosphor are studied by using a Hitachi F-4600 fluorescence spectrophotometer equipped with a 450 W Xe lamp.The effects of Ce3+,CaCl2 and H3BO3 on the crystal structure and luminescent properties of Ca2BO3Cl:Eu2+ are studied.The results show that its emission intensity can be effectively enhanced by increasing absorption in the region of ultraviolet-near ultraviolet light,which is from the sensitizer Ce3+.The emission intensity of Ca2BO3Cl:Eu2+ can also be enhanced by the excess CaCl2 and H3BO3,and the optimal excess mole concentrations are 5 mol% and 15 mol%,respectively.White LED is fabricated with the phosphor and the 460 nm InGaN LED chip,and the CIE chromaticity coordinate is (0.339,0.351).

    参考文献
    相似文献
    引证文献
引用本文

李盼来,徐征,赵谡玲,张福俊,张妍斐.用于白光LED的Ca2BO3Cl:Eu2+发光特性研究[J].光电子激光,2012,(10):1851~1855

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码