间隔层提高有机电致发光器件的性能
DOI:
CSTR:
作者:
作者单位:

作者简介:

李韶杰(1971-),男,工程师,主要从事物理教学与研究工作 .

通讯作者:

中图分类号:

基金项目:

国家自然科学基金(61076066)、陕西科技大学自然科学基金(ZX09-31)和陕西省科技统筹创新工程计划(2011KTCQ01-09)资助项目 (1.陕西科技大学 理学院,陕西 西安 710021; 2.陕西科技大学 电气与信息工程学院, 陕西 西安 710021)


Improvement of the performance of OLEDs by using the interlayer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    使用不同的有机材料作为间隔层,制备了基于CB P材料的一系列红绿双发光层有机 电致发光器件(OLED),其结构为ITO/MoO3(50nm)/NPB(40nm)/TCTA(10 nm)/CBP:R-4B(20nm,2%)/ 间隔层(3nm)/CBP:GIr1(30nm,14%)/BCP(10 nm)/Alq3(20nm)/LiF(1nm)/Al(100nm),其中间隔 层材料使用BCP、TPBi和TCTA。实验比较了加入不同间隔层后OLED的发光特性,结果显 示,对发光面积为0.8cm2的器件,当器件加入间隔层后,电流效 率和亮度有很大提高,用 TCTA作间隔层时得到器件的最大效率为39.98cd/A,最大亮度为29790cd/m2;并且使用间隔 层后OLED发光性能稳定,电致发光(EL)光谱和色坐标不随驱动电压的变化而产生变化。

    Abstract:

    Double-emitting layer(green and red) phosphorescent organic lighting emitting devices (OLEDs) were fabricated by using organic material as the interlayer.The structure of the devices is ITO/MoO3(50nm)/NPB(40nm)/TCTA(10nm)/CBP:R-4B(20nm,2%)/interlayer(3nm )/CBP: GIr1(30nm,14%)/BCP(10nm)/Alq3(20nm)/LiF(1nm)/Al(100nm).Interlayers are BC P,TPBi and TCTA,respectively.Comparing 4kinds of different interlayer mate rials,the luminescence characteristics of the devices are investigated.The results show that the current efficiency and the brightness are greatly improved because of the usage of interlayer.Using TCTA as the inter layer,we obtain the maximum efficiency of 39.98cd/A and the maximum brightnes s of 29790cd/m2.In addition,luminescent properties of OLEDs could be kept stable.EL spectra and co lor coordinates substantially don′t vary with the driving voltage.

    参考文献
    相似文献
    引证文献
引用本文

李韶杰,李艳菲,任树锋.间隔层提高有机电致发光器件的性能[J].光电子激光,2013,(11):2060~2064

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2013-04-22
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码