用于塑料光纤通信的Si基单片集成光接收芯片的研制
DOI:
CSTR:
作者:
作者单位:

作者简介:

史晓凤(1987-),女,安徽毫州人,博士研究生,主要从事塑 料光纤通信用的光电集成射芯片和接收芯片等方面的研究.

通讯作者:

中图分类号:

基金项目:

国家自然科学基金(61205060)、福建省自然科学基金(2011J01361)和中国福建省科技计划重点项目(2013H0047)资助项目 (1.厦门大学 物理系,福建 厦门 361005; 2.厦门大学 机电系,福建 厦门 361005; 3.厦门大学 能源研究院,福建 厦门 361005)


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    设计并用低成本的0.5μm BCD(biplor,CMOS and DMOS)工艺实现了用于650nm塑料光纤(POF)通 信 的Si基单片集成光接收芯片,其中包含了与标准工艺兼容的大面积的叉指状的PIN结构的光 电探测器(PD)、跨阻放大器(TIA)以及后端放大器(PA)。采用NI公司的图形化编程软件LabVIEW和硬 件PXI并结合光 学调整平台的测试方案对流片后的光接收芯片进行测试,结果表明,PD的暗电流为pA量级, 响应度为0.25A/W,电容为4.4pF;对650nm的入射光,在180Mbit/s速率的伪随机二进制 序列(PRBS)以 及小于10-9的误码率(BER)条件下,测得光接收芯 片的灵敏度为-14.6dBm,并能得到清晰的 眼图,包括200μm×200μm的PD在内总的芯 片面积0.9mm2,5V的电源下功耗为60mW 。

    Abstract:

    This paper describes a silicon-based monolithic integrated optical r eceiver for 650nm plastic optical fiber (POF) communication realized in 0.5μm biplor,CMOS and DMOS (BCD) process .It consists of large area cross finger-type PIN photodetector (PD) that is compatible with standard proce ss,transimpedance amplifier and post amplifiers.Testing scheme with the graphical programming software LabVIEW,h ardware PXI and optical adjustment platform is proposed to test the optical receiver chip after tap-out .Measurement results show that the dark current of PD is at pA magnitude,the responsivity is 0.25A/W and the capac itance is 4.4pF.The sensitivity of receiver is -14.6dBm at 180Mbit/s pseudo random binary sequence (PRBS) and BER is less than 10-9 for 650nm input light.A clear eye diagram is demonstra ted.The area of optical receiver is 0.9mm2including the PD area of 200μm×200μm,and the power dissipation is 60mW with power supply of 5V.

    参考文献
    相似文献
    引证文献
引用本文

史晓凤,程翔,陈朝,李继芳,颜黄苹,潘江炳,范程程.用于塑料光纤通信的Si基单片集成光接收芯片的研制[J].光电子激光,2013,(11):2086~2091

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2013-04-01
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码